DIGITAL ECU TUNER 3, 4 Bar
DIGITAL ECU TUNER 3, 4 Bar
DIGITAL ECU TUNER 3, 4 Bar
DIGITAL ECU TUNER 3, 4 Bar
DIGITAL ECU TUNER 3, 4 Bar
DIGITAL ECU TUNER 3, 4 Bar
Click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Fast Shipping

    Expedited delivery options

DIGITAL ECU TUNER 3, 4 Bar

ECUMaster
ECUD40
Many in stock
$449.00
DIGITAL ECU TUNER 3 is the most popular piggyback tuning device in Europe and has now...
Size Guide
$449.00

DIGITAL ECU TUNER 3, 4 Bar
is the most popular piggyback tuning device in Europe and has now hit U.S. shores. Despite its small size, the DET3 is an extremely capable piggyback tuning device. The DET3 allows for the removal of the airflow meter on most applications, and ignition timing can be monitored and adjusted via 16x16 tables. The parametric output channels can be configured to control  boost with the use of a boost control solenoid, nitrous activation, water or methanol injection control, etc. Launch control and map switching are also among the advanced features available to the end user. In "Fuel Implant" mode, the DET3 operates much like a standalone ECU, calculating fuel requirements based on RPM, IAT, CLT, TPS and even O2 feedback, and can drive up to 4 injectors directly (in normal installations the injectors are not controlled directly, so the DET3 can be used with any number of injectors, you are not limited to 4). The DET3 is a comprehensive piggyback device and is available with a 4 bar MAP sensor for $420
 

Technical Details

  • Four 16x16 tables (fuel map,two PWM tables, ignition table)
  • 8 Correction tables, 16x1
  • 2 Independent switchable map sets
  • Built-in 4 bar MAP sensor (Internally connected to Analog In #2)
  • Capable of modifying one analog signal
  • 4 Analog inputs
  • Internal datalogging with built-in flash memory
  • Battery voltage monitoring
  • Supports frequency output air flow meters (for signal modification) 17Hz-4kHz
  • Supports VR and Hall effect crank sensors as well as ignition module signals.
  • Supports both single ended and differential signals
  • Supports all common crank trigger patterns: 60-2, 36-2, 36-1, Multitooth, Ignition Modules and more
  • Parametric output can be configured for boost control
  • Output for 4 high impedance injectors in batch fire (only used in "Fuel Implant" mode, not when installed as a piggyback
  • ON/OFF parametric output
  • Automatic conversion of MAP to MAF with the use of the learning algorithm
  • Launch control
  • Road dyno
  • Supports individual calibration of each analog sensor – device displays values with correct units
  • Free firmware updates – new crank trigger patterns and new functionality
  • Fuel Implant mode – drive injectors in standalone mode (batch fire)
  • USB communication, cable included
  • 24 month warranty

PC Requirements

  • Windows 2000, XP, Vista, Windows 7, Windows 8
  • Screen resolution of at least 1024x768 16bit
  • CPU with a clock of at least 600MHz
  • USB port

What's in the box

  • Digital ECU Tuner 3
  • USB cable
  • Connector
  • Terminals
  • Card with link to software and driver downloads (available for free from our site at any time)
  • Set of resistors and diodes (used in some applications)

Tech Notes:
- Internal MAP sensor is connected to Analog Input #2 internally. Do not wire any external analog signal to Analog Input #2.  
- DET3 not compatible with the Nissan 360 deg CAS trigger.

USER MANUAL LOCATED HERE.

Read More
Read Less
Shipping Policy

All orders with mismatched billing and shipping addresses will be cancelled if the following conditions are not met. A seller protected payment method such as PayPal or Shop Pay is used. All orders that we deem to be potentially fraudulent/risky are subject to cancellation at our discretion. Expedited shipping methods do not guarantee same-day fulfillment, please call or email if the order is time sensitive. Estimated transit times may not be accurate. If you need an item fast choose a shipment method that will work for your timeline. Customers are responsible for paying customs duties on items shipped outside of the United States. Values on international shipments will not be modified to reflect a lower cost.

Returns Policy

It is ultimately your responsibility to determine that the parts you order are the correct items for your vehicle model and year. We will work with you in any reasonable means to ensure the product fits your vehicle build, it would be near impossible for us to know every vehicle model and if all aftermarket parts will or will not work with them. Unopened new products may be returned if the following conditions are met. You have made contact with us within 7 days of purchase letting us know you no longer need this time at wardautoracingparts@gmail.com- Please include your order number. You MUST contact us within 7 days of receiving items or a return will not be accepted. All returns are subject to a 10-30% Restocking fee. We have to email you back agreeing to the return with a RMA Number and return instructions. Once the item is returned to our location we will inspect the item within 3-5 business days. Once we verify the item is still in new condition and able to be resold we will issue the refund minus any fees or shipping at the time of purchase. Orders that do not meet all criteria may be considered but will receive a restocking fee of 10-30%. Returns are not permitted for electronic components, Open boxed, damaged or tested parts. No credit will be given for shipping fees or any form of payment fees. Items must be in brand new condition, in original packaging, containing all original contents, and have not been installed. If items are not new re-saleable condition, we will contact you for further options. It's up to us to determine if the items Is returnable.

Warranty Policy

We are unable to warranty parts that have not been installed by our shop. If the manufacturer offers a warranty on an item its your responsibility to contact the manufacturer to initiate that warranty claim.

Shipping Claims

Damaged or lost goods are the sole responsibility of the carrier (USPS, UPS, Fedex, ETC.) Title of merchandise passes from the shipper to the carrier after it leaves our doors, and to the customer delivery. All parts should be thoroughly inspected upon arrival.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×